Method for producing ammonium bromide from a bromide-containing polycomponent hydromineral feedstock of commercial brines of the chloride calcium-magnesium type, which consists in the fact that the brine stream, purified from dissolved iron, manganese, and insoluble impurities, is subjected to preheating to 30-35° C., neutralization of alkalinity, and acidification to pH values of 2.5 using mineral acids to prevent hydrolysis of free bromine, then the oxidation of bromide ions with gaseous chlorine to elementary bromine is performed in two stages:
- in Stage I, the oxidation of bromide ions to elementary bromine is performed at 73%-74% of the initial content in a flow chlorinator operating in a countercurrent mode;
- the air desorption of elementary bromine is performed in a countercurrent mode in a desorber;
- the absorption of elementary bromine from a bromine-air mixture is performed in a column-type mass transfer apparatus with a multidirectional screw nozzle operating in a countercurrent mode;
- a cooled ammonium bromide solution with a concentration of 400 g/dm3 is used as an absorbent;
- then the reduction of absorbed elementary bromine in the form of complex bromide (NH4 [Br2] Br) to bromide ions is performed in the reactor;
- the resulting ammonium bromide solution is purified from bromine impurities using formic acid, then the purified ammonium bromide solution is evaporated in two stages:
- in Stage I, evaporation is performed to a concentration of ammonium bromide of 50% in vacuum evaporators with water vapor recompression;
- in Stage II, evaporation is performed in evaporators equipped with steam jackets and anchor-type mixers, and evaporation is performed until a pulp containing ammonium bromide crystals is obtained, with a ratio of ammonium bromide to water of 3:1, the resulting pulp is cooled to 60-62° C. and subjected to centrifugation to separate crystalline ammonium bromide from the mother liquor, then the separated crystals are dried in a screw dryer, and after Stage I of desorption, a bromide-containing polycomponent hydromineral feedstock is supplied for the oxidation of bromide ions to elementary bromine with gaseous chlorine up to 88% 90% of its residual content in order to extract the residual amount of bromine.