Under water coating method
OwnerAhmad Zolghadriinventor
Life of this patent
Estimating the term…
Loading patent…
OwnerAhmad Zolghadriinventor
Estimating the term…
Marine Structure platforms and pillars are consistently subject to corrosion. This patent claim is utilizing steel shuttering for polymer coating at tide water level. Sleeve is fabricated, angle iron welded to edges, drilled for bolting. One side may be hinged. Shaped flats welded to cover top and bottom gaps between sleeve and structure. Holes drilled on top for water vacuum, air and polymer injection. Internal surface of sleeve covered with grease and glass wool, extended to edges of angles to be bolted between sealing gaskets. Sleeve connected to gantry chain block and lowered below the low tide, bolted to structure and sealed. The water between sleeve and structure vacuumed through one hole while air pumped through another, then polymer injected inside until polymer appears through opposite hole. Two upper holes must be plugged, then alternatively opened every ten minutes releasing gases. Sleeve removed three hours later.
Marine Structure particularly Oil and Gas rigs and platforms, light house (marine guide lights) pillars and jetties are consistently subject to severe corrosion due to existence of chlore ion. Maximum corrosion occurs in splash zone area due to existence of multiple salts and oxygen.