Process for the production of ammonia and the corresponding synthesis gas

A process for producing ammonia from a desulfurized hydrocarbon containing feedstock available at a pressure of at least 30 bars, comprising:

• (a) dividing said feedstock into two fractions, the first fraction representing 5 to 70 percent of the total feedstock,
• (b) subjecting only the first fraction from (a) to a primary steam reforming reaction, by mixing said fraction with steam, and heating the mixture thereof by indirect heat exchange, in the presence of a reforming catalyst, to form a gaseous effluent including hydrogen at a temperature between 680.degree. and 820.degree. C.
• (c) combining the gaseous effluent from (b) with the second fraction from (a), to obtain a gas mixture at a minimum temperature of 550.degree. C. and containing at least 5 mole percent hydrogen and at least 25 percent methane equivalent, on a dry gas basis,
• (d) reacting in a single step the gas mixture from (c) with compressed air in a secondary reforming reactor operating under essentially adiabatic conditions and comprising a gas mixing zone and a reaction zone, the amount of air injected in said mixing zone being sufficient to initiate therein the partial oxidation reaction, and said reaction zone containing a single bed of catalyst or catalysts, thus producing a raw synthesis gas at a temperature between 850.degree. and 1100.degree. C. and containing an amount of nitrogen appreciably larger than that required to convert to ammonia all the potential hydrogen contained therein, and a molal methane percentage of less than one-tenth of the percent methane equivalent contained in the gas mixture from (c),
• (e) shift converting to carbon dioxide carbon monoxide contained in the gas effluent from (d), by reacting said gas affluent with steam in the presence of at least one shift conversion catalyst,
• (f) removing essentially all the carbon dioxide contained in the gas effluent from (e), by scrubbing with a solvent,
• (g) methanating the residual carbon oxides contained in the gas effluent from (f), by reacting with part of the hydrogen therein, in the presence of a methanation catalyst, thus producing a synthesis gas having a molal H.sub.2 /N.sub.2 ratio less than 2.4,
• (h) removing the excess nitrogen contained in the gas effluent from (g) by partial condensation and subsequent distillation of said gas effluent at a temperature between -175.degree. and -190.degree. C., thereby producing a final synthesis gas having essentially the stoichiometric composition for ammonia synthesis, and a liquid containing said excess nitrogen, all the refrigeration requirements of said removal being supplied by the expansion of at least part of said liquid to a pressure below 6 bars absolute,
• (i) compressing the final synthesis gas produced in (h), and injecting said gas into an ammonia synthesis loop where liquid ammonia is thus produced,
• (j) withdrawing the liquid ammonia produced in (i) and letting it down to a pressure above that of the final synthesis gas produced in (h),
• (k) recycling at least part of the gas released in step (j) to any point of the process sequence upstream of the excess nitrogen removal step (h).